Embroidery Digitizing – A Craftsmanship for All Seasons
Embroidery digitizing-Perhaps the most important function of bonding crafts today is to provide relaxation and the ability to practice imagination. The result should, however, be attractive and sustainable. Therefore, materials and points should be smartly chosen, and the work itself is carefully prepared and performed. Fabrics and threads must be of good quality and compatible. The wire must be able to easily glide through the fabric and be able to shape the texture the craftsman has in mind. Needles should be the correct size for the fabric and thread to be used.
For embroidery digitizing, use a sewing needle or needle stitch. A needle for a carpet, a needlepoint, a canvas, or a threaded yarn in thicker materials is indispensable. One pin slightly thicker than double the thickness of the wire that will be used will be easiest to use. Scissors are important for this profession. It must be small, pointed and pointed. Style is needed for a job in which the threads are set aside to shape the caps.
When selecting the contact count counting fabric, check the number of threads needed for the sample so that the last job is the desired size. For some jobs, which is also important that the basics and the kicks have the same number of sines per square inch, that is, the inches measured in any direction must contain the same number of the son, otherwise the alleged pattern has the same vertical and horizontal dimensions that will be distorted.
For the stretched and tissue of the son, woven from a dyed son is best: she is worn white and colored yarn, the son will not always be completely unified during the color. Take care by pulling a few threads off the edge of the cut. The fabric that is used in special designs, or any kind of work in which the dissolved material has to be previously reduced, and check for its dying color.
Graphical or graphic paper is very useful if you want to increase or decrease the pattern. The yarn counting is followed by a pattern drawn on a paper chart. It is useful to mark the central line and boundaries of important grid sections. For embroidery on the fabric, drawing is drawn on transparent paper. There are several ways to upload to the web. For example, charcoal paper can be placed between the fabric and the fabric, after which the design is transferred firmly by attaching the hard pen. It is also possible to rub the back of the drawing with a soft pencil, replacing the charcoal paper. In all cases, the fabric should remain smooth and tensile and the sample is maintained. It is necessary to use a solid base and be careful not to be afraid of pressing hands.
A better way, but still elaborate, is to connect the pattern lines by pins or wheels using a flexible base layer. Spread the fabric over the paper layer. Put the upright pattern on top. It is possible to hold one side of the heavyweight or heavy bar trays. Dampen a piece of a roller or a rubber foam with an oil paint with a diluted paint thinner or tungsten. Use the blue color on a pale, white cloth in the dark and lightly press the color through the holes. Crafted paper can occasionally be lifted from time to time to see if the design is clear. Otherwise, you can press the second layer of color. If colored powder is used, the lines can work with the pencil. All fabrics do not get the same color, so it is desirable to experiment with the material in advance.
For more details about our digitizing services, please visit
For more details about our vector graphic services, please visit
For more details about our custom patches, please visit
Please read our previous post